EK-Pro Radiator P360 Multiport - Black
Product EAN: 383110991007845mm thick 360mm radiator with four G1/4" ports, 14 copper tubes, and 18 FPI copper fins for high-performance, low-noise liquid cooling in server and workstation loops.
- Size
- 360mm
- Fan size
- 120 mm
- Dimensions (L x H x W)
- 395.5 x 120 x 45 mm
- Materials
- High grade 99.9% copper fins, H90 brass tubing, H62 brass end tank chambers, stainless steel side plates, nickel-plated brass plugs
- Mass
- 1.25 kg
Low-Noise, High-Performance 360mm Radiator for Enterprise Loops
The EK-Pro P Series radiators, at 45mm thickness, excel in low noise and high performance with four G1/4" threaded ports for versatile loop planning. Featuring 14 2mm-wide copper tubes, it ensures optimal coolant flow and minimal stress on the loop.
High-grade copper fins with 18 FPI density balance thermal transfer and air resistance, even at low fan speeds. Its Push/Pull setup maximizes cooling performance. The radiator is precisely 120mm wide for compatibility and features additional ports for flexible tube routing.
Product details
Unrivaled Thermal Performance
14 copper tubes and 18 FPI copper fins deliver balanced thermal transfer and airflow resistance, maintaining performance even at reduced fan speeds.
Four-Port Design
Four G1/4" threaded ports allow flexible inlet, outlet, and bleed port configurations for versatile loop planning in complex multi-block systems.
Push/Pull Ready
Precisely 120mm wide for compatibility with standard fan mounts. Supports Push/Pull fan configurations for maximum heat dissipation under sustained loads.
Three design decisions worth calling out
18 FPI Non-Louvered Copper Fins
High-grade 99.9% copper fins at 18 FPI density strike an optimal balance between thermal transfer efficiency and airflow restriction, enabling low-noise operation across the full fan speed range.
14 x 2mm Copper Tubes
Fourteen 2mm-wide copper tubes distribute coolant evenly across the full radiator width, minimizing pressure drop and reducing loop stress on pump assemblies.
Four G1/4" Multiport Layout
Additional ports beyond the standard inlet/outlet pair allow for bleed port use and flexible tube routing in multi-radiator or complex manifold-based loop configurations.
Full datasheet
| Dimensions (L x H x W) | 395.5 x 120 x 45 mm |
| Materials | High grade 99.9% copper fins, H90 brass tubing, H62 brass end tank chambers, stainless steel side plates, nickel-plated brass plugs |
| Mass | 1.25 kg |
| Ports | 4 x G1/4" |
| FPI | 18 |
| Fan dimension | 120 mm |
| Number of fans | 3 |
| Mounting method | Direct to chassis with Phillips head screws |
| Working pressure | 2500 Pa |
| Maximal working pressure | 30000 Pa in loops containing an EK-Pro Pump Reservoir Manifold, otherwise 75000 Pa |
| Operating temperature range | 5 – 60 °C |
All figures are measured at supplier level. Third-party independent measurement reports are available on request under NDA.
Top & side view, in millimetres
Envelope drawing for chassis-integration work. All measurements in mm.
These drawings represent copyrighted material of LM TEK® and they are meant only for your personal use. Drawing supplied by EK-Pro.
Download resources
Product documentation for specification, integration, and installation is available below. Revision numbers are printed on page one of each file.
Fan Compatibility
Compatible with standard 120 x 120 x 25mm fans. Supports three fans in Push, Pull, or Push/Pull configuration. Precisely 120mm wide for compatibility with most 120mm fan mounts and chassis radiator brackets.
Shipped contents
- · 1× EK-Pro Radiator P360 Multiport - Black
- · 12x Phillips Slotted M4x30mm for 25mm thick fans
- · 12x Phillips Slotted M4x5mm for mounting the radiator directly to the case
- · 6mm steel Allen (Hex) key
- · 9mm steel Allen (Hex) key
Other related products
EK-CryoFuel Clear (Premix 1000 mL)
enterprise
EK-Pro Radiator P480 Multiport - Black
enterprise
EK-Pro Manifold 2CPU 4GPU - Acetal
enterprise
EK-Tube ZMT Matte Black 16/10mm
enterprise
EK-Pro G1/4" Barb Fitting - 10mm
enterprise
EK-Pro Clamp 10/17 - 20 pack
enterprise
360mm Enterprise Radiator for Multi-Block Cooling Loops
Pair with an EK-Pro Pump Reservoir Manifold and GPU or CPU water blocks to build a complete, scalable liquid cooling loop for workstations and server systems.